Tag: frequency

Categories
Amateur Radio Tutorial

How to Remove or Delete the Tone for Repeater Use in Baofeng UV-5R

This is part of a series of posts that hopefully will save people a bunch of time.

How to Delete or Remove the Tone for Repeater Use in Baofeng UV-5R

Important note: if you wait more than 9 seconds between any step below it will automatically go back to home screen and you have to start again, so work those fingers, baby!

  1. Press Menu button
  2. Press 13 on keypad (T-CTCS).  This will bring you to the section of menu where you can edit the tone frequency which will get you into repeaters.
  3. Press menu button again.  This means “I am now editing this part of the menu”. You’ll see a little arrow appear if you have options to see by using the arrow keys.  In this case, a menu will appear because you can toggle between all the tone options.
  4. Toggle with up/down arrows to the setting you want. You can either press the button repeatedly, or press and hold which will turbo-speed you through the frequencies, but what you need to do is get to  *one step above 254HZ* or *one step below 67HZ* which will show the ‘OFF” option.
  5. Press Menu again. This means “I am now saving the settings I edited in step 4. If the voice audio is on you will hear ‘confirm’ which means victory
  6. Press ‘exit’ to get back to the home screen or just wait the 9 seconds or more and it will go there for you automatically

Note for this setting: You will *not* see any indication on your home screen that you have no tone on until you transmit.  When you transmit you will *NOT* see CT lettering appear which means you successfully deleted/removed the tone.

Done! You’ve got rid your tone thingy.

Go to this page for more tutorials as I write them:

RANDOM BAOFENG UV-5R TUTORIALS

Categories
Amateur Radio Tutorial

How to Set the Tone for Repeater Use in Baofeng UV-5R

This is part of a series of posts that hopefully will save people a bunch of time.

How to Set the Tone for Repeater Use in Baofeng UV-5R

Important note: if you wait more than 9 seconds between any step below it will automatically go back to home screen and you have to start again, so work those fingers, baby!

  1. Press Menu button
  2. Press 13 on keypad (T-CTCS).  This will bring you to the section of menu where you can edit the tone frequency which will get you into repeaters.
  3. Press menu button again.  This means “I am now editing this part of the menu”. You’ll see a little arrow appear if you have options to see by using the arrow keys.  In this case, a menu will appear because you can toggle between all the tone options.
  4. Toggle with up/down arrows to the setting you want. You can either press the button repeatedly, or press and hold which will turbo-speed you through the frequencies.
  5. Press Menu again. This means “I am now saving the settings I edited in step 4. If the voice audio is on you will hear ‘confirm’ which means victory
  6. Press ‘exit’ to get back to the home screen or just wait the 9 seconds or more and it will go there for you automatically

Note for this setting: You will *not* see any indication on your home screen that you have a tone on until you transmit.  When you transmit you will then see a CT lettering appear which means you got the tone saved successfully.

Done! You’ve got your tone thingy all set.

Now, you need my tutorial page below to figure out how to remove that little gaffer because it ain’t that simple!

Go to this page for more tutorials as I write them:

RANDOM BAOFENG UV-5R TUTORIALS

Categories
Amateur Radio Tutorial

How to Set the Plus/Minus Offset Duplex Setting for Repeater Use in Baofeng UV-5R

This is part of a series of posts that hopefully will save people a bunch of time.

How to Set the Plus/Minus (+/-) Offset Duplex for Repeater Use in Baofeng UV-5R

Important note: if you wait more than 9 seconds between any step below it will automatically go back to home screen and you have to start again, so work those fingers, baby!

  1. Press Menu button
  2. Press 25 on keypad.  This will bring you to the section of menu where you can edit whether duplex is + or – (default is 600 by the way).
  3. Press menu button again.  This means “I am now editing this part of the menu”. You’ll see a little arrow appear if you have options to see by using the arrow keys.  In this case, a menu will appear because you can toggle between + , – and blank
  4. Toggle with up/down arrows to the setting you want.
  5. Press Menu again. This means “I am now saving the settings I edited in step 4. If the voice audio is on you will hear ‘confirm’ which means victory
  6. Press ‘exit’ to get back to the home screen or just wait the 9 seconds or more and it will go there for you automatically

Done! You’ve got your offset duplex thing all set.

Go to this page for more tutorials as I write them:

RANDOM BAOFENG UV-5R TUTORIALS

Categories
Amateur Radio Tutorial

How to Quickly Manually Program a Frequency in Baofeng UV-5R

This will be a series of posts that hopefully will save people a bunch of time.

How to Simply Manually Punch in a Frequency

 

  1. push VFO/MR orange button to make sure it’s in ‘frequency mode’, not in ‘channel mode’.  If you have the voice feature on (on by default) the girl will tell you which mode you are in.  Push it again to check if you aren’t sure and cycle through the two options
  2. Punch in all the numbers in frequency but don’t forget the last number.  146.55 for example you would punch in as 146550

Done! You’ve got your frequency.

But you might not have your tone or your offset frequency.  To deal with those bad boys, try:

HOW TO SET THE OFFSET FREQUENCY FOR REPEATER USE IN BAOFENG UV-5R

and…

HOW TO SET THE TONE FOR REPEATER USE IN BAOFENG UV-5R